Carpet
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 8
to Rev 9
in Carpet.
---
title: Carpet
…124 unchanged lines
- "Seaming diagram and tile layout diagram"
- "Maintenance instructions"
+constraint: all_of
```
…26 unchanged lines
- "Installer qualification data"
- "Pre-installation conference report"
+constraint: all_of
```
…27 unchanged lines
- "Maintenance data"
- "Attic stock transmittal"
+constraint: all_of
```
…19 unchanged lines
```datasheet
−label: Minimum Installer Experience with the Specified Format and Attachment Method
+label: Installer Experience with the Specified Format and Attachment Method
type: range
unit: years
…2 unchanged lines
max: 10
setpoints: [0, 1, 2, 3, 5, 10]
+constraint: min
```
…48 unchanged lines
```datasheet
−label: Minimum Acclimation Period Before Installation
+label: Acclimation Period Before Installation
type: range
unit: hours
…3 unchanged lines
setpoints: [0, 24, 48, 72, 96]
default: 48
+constraint: min
```
…57 unchanged lines
setpoints: [0.0625, 0.125, 0.1875, 0.25]
default: 0.1875
+constraint: max
```
…216 unchanged lines
```datasheet
−label: Minimum Face Weight
+label: Face Weight
type: range
unit: oz/yd²
…2 unchanged lines
max: 60
setpoints: [10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 45, 50, 60]
+constraint: min
```
…12 unchanged lines
max: 0.75
setpoints: [0.06, 0.08, 0.094, 0.109, 0.125, 0.156, 0.187, 0.25, 0.312, 0.375, 0.5, 0.75]
+constraint: exact
```
…5 unchanged lines
```datasheet
−label: Minimum Average Pile Density
+label: Average Pile Density
type: range
unit: oz/yd³
…4 unchanged lines
setpoints: [2000, 2500, 3000, 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000, 10000]
default: derived
+constraint: min
```
…5 unchanged lines
```datasheet
−label: Minimum Texture Appearance Retention Rating, ASTM D7330
+label: Texture Appearance Retention Rating, ASTM D7330
type: range
unit: rating
…2 unchanged lines
max: 4.0
setpoints: [2.5, 3.0, 3.5, 4.0]
+constraint: min
```
…9 unchanged lines
```datasheet
−label: Minimum Tuft Bind
+label: Tuft Bind
type: range
unit: lbf
…2 unchanged lines
max: 25
setpoints: [3, 5, 6.25, 8, 10, 12, 15, 20, 25]
+constraint: min
```
…5 unchanged lines
```datasheet
−label: Minimum Delamination Strength of the Secondary Backing
+label: Delamination Strength of the Secondary Backing
type: range
unit: lbf/in
…3 unchanged lines
setpoints: [2.5, 3, 3.5, 4, 5, 7.5, 10]
default: 2.5
+constraint: min
```
…116 unchanged lines
```datasheet
−label: Maximum Electrostatic Propensity, AATCC 134
+label: Electrostatic Propensity, AATCC 134
type: range
unit: kV
…3 unchanged lines
setpoints: [1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 5.0]
default: 3.5
+constraint: max
```
…9 unchanged lines
```datasheet
−label: Minimum Colorfastness to Light, AATCC Gray Scale Grade
+label: Colorfastness to Light, AATCC Gray Scale Grade
type: range
unit: grade
…3 unchanged lines
step: 0.5
default: 4
+constraint: min
```
## The minimum colorfastness to crocking, wet and dry, assessed on the AATCC gray scale for staining in accordance with AATCC 165, shall be as indicated in the datasheet.
```datasheet
−label: Minimum Colorfastness to Crocking, AATCC Gray Scale Grade
+label: Colorfastness to Crocking, AATCC Gray Scale Grade
type: range
unit: grade
…3 unchanged lines
step: 0.5
default: 4
+constraint: min
```
…358 unchanged lines
max: 25
setpoints: [1, 5, 10, 15, 20, 25]
+constraint: min
```
…11 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: min
```
…26 unchanged lines
max: 10
setpoints: [0, 1, 2, 3, 5, 10]
+constraint: exact
```
…3 unchanged lines
## Attic stock is what makes a modular tile floor repairable by the tile: a soiled or damaged tile is lifted and replaced from the same dye lot and the repair disappears, whereas tile bought later matches the specification and not the floor. For broadloom the stock serves patching, and a patch from a different dye lot is as visible as the damage it replaced. {note}