Entrance Flooring and Walk-Off Systems
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 8
to Rev 9
in Entrance Flooring and Walk-Off Systems.
---
title: Entrance Flooring and Walk-Off Systems
…105 unchanged lines
- "Flammability test report for textiles"
- "Maintenance instructions"
+constraint: all_of
```
…21 unchanged lines
- "Record shop drawings"
- "Spare parts receipt"
+constraint: all_of
```
…5 unchanged lines
```datasheet
−label: Minimum Installer Experience with Entrance Flooring Systems
+label: Installer Experience with Entrance Flooring Systems
type: range
unit: years
…2 unchanged lines
max: 10
setpoints: [0, 1, 2, 3, 5, 10]
+constraint: min
```
…130 unchanged lines
```datasheet
−label: Minimum Total Walk-Off Length at Each Entrance
+label: Total Walk-Off Length at Each Entrance
type: range
unit: ft
…3 unchanged lines
max: 40
setpoints: [0, 3, 6, 10, 12, 15, 20, 25, 30, 40]
+constraint: min
```
…67 unchanged lines
- "Carpet or fiber"
- "Brush"
+constraint: any_of
```
…10 unchanged lines
- "Carpet or fiber"
- "Brush"
+constraint: any_of
```
…10 unchanged lines
- "Serrated aluminum tread"
- "Brush"
+constraint: any_of
```
…78 unchanged lines
max: 4
setpoints: [0.25, 0.375, 0.5, 0.625, 0.75, 0.8125, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 4]
+constraint: exact
```
…39 unchanged lines
max: 3000
setpoints: [250, 300, 350, 500, 750, 1000, 1500, 2000, 3000]
+constraint: min
```
…124 unchanged lines
```datasheet
−label: Minimum Wet Dynamic Coefficient of Friction of Hard Tread Surfaces
+label: Wet Dynamic Coefficient of Friction of Hard Tread Surfaces
type: range
unit: DCOF
…4 unchanged lines
setpoints: [0.42, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70]
default: derived
+constraint: min
```
…76 unchanged lines
max: 25
setpoints: [1, 2, 3, 5, 10, 15, 20, 25]
+constraint: min
```
…10 unchanged lines
max: 5
setpoints: [1, 2, 3, 5]
+constraint: min
```
…11 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: min
```
…14 unchanged lines
- "Grille connector and hinge hardware"
- "Frame anchors and shims"
+constraint: all_of
```
…8 unchanged lines
max: 10
setpoints: [0, 2, 3, 5, 10]
+constraint: min
```
## Spare parts shall be from the same production run as the installed material where color matching depends on it, and shall be delivered in the manufacturer's packaging labeled with the system, the insert or textile type, and the color.