Corpus sync: neutrality remakes, note hygiene, datasheet relocation, transformer-split cross-refs
---
title: Glued-Laminated Timber
…142 unchanged lines
## Members shall not be field-modified in any way that alters the certified cross-section, removes tension laminations, or invalidates the certification mark, except as approved in writing by the Engineer of Record.
−## The mill shall mark the top (compression) face of every bending member so that camber orientation can be verified in the field before the member is connected. {note}
+## The mill shall mark the top (compression) face of every bending member so that camber orientation can be verified in the field before the member is connected.
# Material and Design Properties {toc}
…30 unchanged lines
```
−### Where a specific combination is required, the combination designation shall be stated on the structural drawings and reproduced on the shop drawings. {note}
+### Where a specific combination is required, the combination designation shall be stated on the structural drawings and reproduced on the shop drawings.
## Species {note}
…88 unchanged lines
```
−### Member depth is built up in 1-1/2 in lamination increments; the depth specified shall be a whole multiple of the lamination thickness. {note}
+### Member depth is built up in 1-1/2 in lamination increments; the depth specified shall be a whole multiple of the lamination thickness.
## Camber {note}
…287 unchanged lines
## Replacement members shall be fabricated to the original stress class, species, layup, camber, and certification requirements.