---
title: Metal Roof Panels
…15 unchanged lines
## Panel-integrated flashing, eave, rake, ridge, valley, and penetration trim are within scope. This standard does not cover the following, which are coordinated with this section but specified elsewhere: {note}
−- Stand-alone custom sheet metal work, gutters, copings, and trim furnished as a separate scope — see [[syncs/sheet-metal-flashing-and-trim]].
−- Roof thermal insulation and air/vapor control layers — see [[syncs/building-thermal-insulation]].
−- Vertical metal wall cladding and matching wall panels — see [[syncs/metal-wall-panels]].
+- Stand-alone custom sheet metal work, gutters, copings, and trim furnished as a separate scope — see [[sync/sheet-metal-flashing-and-trim]].
+- Roof thermal insulation and air/vapor control layers — see [[sync/building-thermal-insulation]].
+- Vertical metal wall cladding and matching wall panels — see [[sync/metal-wall-panels]].
# Referenced Standards {toc}
…711 unchanged lines
- Touch-up coating
```