Concrete Equipment Pads
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 8
to Rev 9
in Concrete Equipment Pads.
---
title: Concrete Equipment Pads
…92 unchanged lines
- "Layout of items cast into the pad"
- "Mixture class designation and exposure classes for pad concrete"
+constraint: all_of
```
…21 unchanged lines
- "Evaluation report and installation instructions for post-installed anchors"
- "Qualifications of the party verifying the anchorage pattern"
+constraint: all_of
```
…25 unchanged lines
- "Strength test results indexed to each pad"
- "Deviation reports and directed dispositions"
+constraint: all_of
```
…19 unchanged lines
- "Proof loading of a sample of the post-installed anchors"
- "No special inspection of pad anchorage required"
+constraint: all_of
```
…94 unchanged lines
```datasheet
−label: Minimum Pad Projection Beyond the Equipment Base Perimeter
+label: Pad Projection Beyond the Equipment Base Perimeter
type: range
unit: in
…2 unchanged lines
max: 36
step: 0.5
+constraint: min
```
…36 unchanged lines
step: 0.5
default: deferred
+constraint: exact
```
…15 unchanged lines
setpoints: [1, 1.5, 2, 3, 4, 6, 8, 12]
default: 4
+constraint: exact
```
…8 unchanged lines
max: 36
setpoints: [0, 2, 3, 4, 6, 8, 12, 18, 24, 36]
+constraint: exact
```
…30 unchanged lines
setpoints: [0.25, 0.5, 0.75, 1, 1.5, 2]
default: 0.75
+constraint: exact
```
…18 unchanged lines
step: 1
default: deferred
+constraint: min
```
…55 unchanged lines
step: 1
default: deferred
+constraint: exact
```
…10 unchanged lines
step: 0.5
default: deferred
+constraint: exact
```
…20 unchanged lines
```datasheet
−label: Minimum Concrete Surface Profile at the Bonded Interface
+label: Concrete Surface Profile at the Bonded Interface
type: range
unit: ICRI CSP
…2 unchanged lines
max: 10
step: 1
+constraint: min
```
…38 unchanged lines
setpoints: [2500, 3000, 3500, 4000, 4500, 5000, 6000, 8000]
default: deferred
+constraint: min
```
…58 unchanged lines
step: 1
default: deferred
+constraint: exact
```
…10 unchanged lines
step: 1
default: deferred
+constraint: exact
```
…8 unchanged lines
max: 100
step: 0.5
+constraint: exact
```
…56 unchanged lines
setpoints: [0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1, 1.25, 1.5, 1.75, 2, 2.5]
default: deferred
+constraint: exact
```
…10 unchanged lines
step: 0.5
default: deferred
+constraint: min
```
…12 unchanged lines
step: 0.25
default: deferred
+constraint: exact
```
…60 unchanged lines
step: 0.5
default: deferred
+constraint: exact
```
…26 unchanged lines
- "Grounding bushings and bonding jumpers at the raceway stub-ups"
- "No grounding provisions cast into the pad"
+constraint: all_of
```
…21 unchanged lines
- "Formed drainage opening through the pad"
- "No additional items cast into the pad"
+constraint: all_of
```
…95 unchanged lines
```datasheet
−label: Minimum Fraction of Specified Compressive Strength Before Equipment Is Set
+label: Fraction of Specified Compressive Strength Before Equipment Is Set
type: range
unit: "%"
…3 unchanged lines
setpoints: [25, 50, 60, 70, 75, 80, 85, 90, 100]
default: 75
+constraint: min
```
…23 unchanged lines
setpoints: [0.0625, 0.125, 0.25, 0.5, 1, 2]
default: 0.5
+constraint: max
```
…9 unchanged lines
setpoints: [0.125, 0.25, 0.5, 0.75, 1, 2]
default: 0.5
+constraint: max
```
…9 unchanged lines
setpoints: [0.0625, 0.125, 0.1875, 0.25, 0.375, 0.5]
default: 0.125
+constraint: max
```
…11 unchanged lines
setpoints: [0.03125, 0.0625, 0.125, 0.1875, 0.25, 0.5]
default: 0.125
+constraint: max
```
…9 unchanged lines
setpoints: [0.0625, 0.125, 0.25, 0.375, 0.5, 1]
default: 0.5
+constraint: max
```
…8 unchanged lines
max: 5
step: 0.25
+constraint: max
```
…41 unchanged lines
- "Forms are dimensionally correct, tight, braced, and treated with release agent"
- "Bearing surface is clean, sound, and in the required moisture condition"
+constraint: all_of
```
…26 unchanged lines
- "Raceway stub-ups and grounding conductors are present, clean, and correctly located"
- "Pad is free of cracks, spalls, exposed reinforcement, and surface defects outside the acceptance criteria"
+constraint: all_of
```
…33 unchanged lines
setpoints: [1, 2, 3, 5, 10]
default: 1
+constraint: min
```
…7 unchanged lines
## Material warranties for the anchors, grout, bonding agents, coatings, and repair materials incorporated in the pad work shall be assigned to the Owner and included in the closeout submittals.