Earthwork
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 7
to Rev 8
in Earthwork.
---
title: Earthwork
…100 unchanged lines
- "Earthwork sequence and stockpile plan"
default: ["Fill source report for each on-site and imported source", "Excavation safety plan", "Earthwork sequence and stockpile plan"]
+constraint: all_of
```
…24 unchanged lines
- "Over-excavation and replacement record"
default: ["Field density test reports, passing and failing", "Proof-rolling records", "Foundation bearing surface observation reports", "As-built grading survey", "Differing site condition record", "Over-excavation and replacement record"]
+constraint: all_of
```
…160 unchanged lines
drawing_ref: "the geotechnical report fill recommendations"
default: deferred
+constraint: any_of
```
…5 unchanged lines
```datasheet
−label: Structural Fill Maximum Particle Size
+label: Structural Fill Particle Size
type: range
unit: in
…2 unchanged lines
setpoints: [1, 1.5, 2, 3, 4, 6]
default: 3
+constraint: max
```
…3 unchanged lines
```datasheet
−label: Structural Fill Maximum Liquid Limit
+label: Structural Fill Liquid Limit
type: range
min: 20
max: 50
step: 1
default: 40
+constraint: max
```
### The maximum plasticity index of structural fill shall be as indicated in the datasheet.
```datasheet
−label: Structural Fill Maximum Plasticity Index
+label: Structural Fill Plasticity Index
type: range
min: 0
max: 25
step: 1
default: 15
+constraint: max
```
…9 unchanged lines
```datasheet
−label: Free-Draining Granular Fill Maximum Fines Content
+label: Free-Draining Granular Fill Fines Content
type: range
unit: '% passing No. 200'
…2 unchanged lines
step: 1
default: 5
+constraint: max
```
…13 unchanged lines
```datasheet
−label: General Site Fill Maximum Plasticity Index
+label: General Site Fill Plasticity Index
type: range
min: 0
…2 unchanged lines
drawing_ref: "the geotechnical report fill recommendations"
default: deferred
+constraint: max
```
…132 unchanged lines
- "Expansive chemical agents"
default: ["Mechanical ripping", "Hydraulic breaker"]
+constraint: any_of
```
…143 unchanged lines
```datasheet
−label: Minimum Drawdown Below the Working Surface
+label: Drawdown Below the Working Surface
type: range
unit: ft
…2 unchanged lines
setpoints: [1, 2, 3, 4, 5]
default: 2
+constraint: min
```
…45 unchanged lines
```datasheet
−label: Maximum Loose Lift Thickness, Roller-Compacted Fill
+label: Loose Lift Thickness, Roller-Compacted Fill
type: range
unit: in
…3 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: max
```
…3 unchanged lines
```datasheet
−label: Maximum Loose Lift Thickness, Hand-Compacted Fill
+label: Loose Lift Thickness, Hand-Compacted Fill
type: range
unit: in
…2 unchanged lines
setpoints: [3, 4, 6, 8]
default: 6
+constraint: max
```
…17 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: exact
```
…9 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: exact
```
…23 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: min
```
…11 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: min
```
…11 unchanged lines
drawing_ref: "the geotechnical report compaction recommendations"
default: deferred
+constraint: min
```
…29 unchanged lines
```datasheet
−label: Maximum Particle Size in Backfill Adjacent to Structures
+label: Particle Size in Backfill Adjacent to Structures
type: range
unit: in
…2 unchanged lines
setpoints: [0.75, 1, 1.5, 2, 3, 4]
default: 2
+constraint: max
```
…8 unchanged lines
setpoints: [2, 3, 4, 5, 6, 8, 10]
default: 5
+constraint: min
```
…41 unchanged lines
```datasheet
−label: Proof-Rolling Vehicle Minimum Gross Weight
+label: Proof-Rolling Vehicle Gross Weight
type: range
unit: tons
…2 unchanged lines
setpoints: [10, 15, 20, 25, 30, 40]
default: 20
+constraint: min
```
…10 unchanged lines
setpoints: [0.5, 1, 1.5, 2]
default: 1
+constraint: max
```
…77 unchanged lines
setpoints: [500, 1000, 1500, 2000, 2500, 3000, 5000]
default: 2500
+constraint: max
```
…8 unchanged lines
setpoints: [1000, 2500, 5000, 7500, 10000]
default: 5000
+constraint: max
```
…8 unchanged lines
setpoints: [50, 100, 150, 200, 300]
default: 100
+constraint: max
```
…40 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: min
```
…5 unchanged lines
## The warranty does not limit the Owner's remedies for a latent defect in fill or compaction discovered after the warranty period.