Instrumentation and Control Cable
P1 batch 4: hazardous-location installations, document confidentiality and AI use, generator paralleling switchgear, interrupter switchgear, medium-voltage drives and metal-enclosed bus now owned; bare-text mentions re-pointed to the new standards
Showing changes from Rev 1
to Rev 2
in Instrumentation and Control Cable.
---
title: Instrumentation and Control Cable
…45 unchanged lines
- The instruments, analyzers, actuators and controllers at either end of the cable: [[sync/process-instrumentation]], [[sync/flow-measurement]], [[sync/analytical-instrumentation]], [[sync/level-sensors]], [[sync/control-valves-and-actuators]], [[sync/valve-and-gate-actuators]] and [[sync/programmable-logic-controllers]]
−## The wiring methods, the conduit seals and the cable types of hazardous (classified) locations are not yet owned by a SynC standard; this standard states the cable of an intrinsically safe circuit and defers the area classification to the drawings and the barrier to [[sync/industrial-control-panels]]. {note}
+## The wiring methods, the conduit seals and the cable types of hazardous (classified) locations are under [[sync/electrical-hazardous-locations]]; this standard states the cable of an intrinsically safe circuit and defers the area classification to the drawings and the barrier to [[sync/industrial-control-panels]]. {note}
## The cable number, the circuit each cable serves, its from and to terminals, its pair or conductor count and its route shall be as indicated on [[drawing: the instrument loop diagrams and the cable schedule]].
…957 unchanged lines
## The warranty administration, the fresh term on a repaired item and the assignment of the manufacturer's warranty shall be as required under [[sync/common-work-results-process]].