Lighting Controls
Remake batch 25 and its neighbor re-points, batch 24 where missing, and the adopted-electrical-code parameter: brought in line with the authoring repository
Showing changes from Rev 6
to Rev 7
in Lighting Controls.
---
title: Lighting Controls
…1205 unchanged lines
## Conductor Identification and Grounding {toc}
−### Every control conductor shall be identified at both ends with the zone or device it serves, in a form that agrees with the point-to-point wiring diagrams and the zone schedule, and the identification products shall comply with [[sync/equipment-labeling]].
+### Every control conductor shall be identified at both ends with the zone or device it serves, in a form that agrees with the point-to-point wiring diagrams and the zone schedule, and the identification products shall comply with [[sync/electrical-identification]].
### Control panels, controllers, and metal device enclosures shall be grounded and bonded in accordance with [[sync/grounding-and-bonding]].
…269 unchanged lines
## Spare devices shall be delivered with the software, the licenses, and the addressing instructions needed to put them into service in the installed system without the manufacturer's attendance.