Loading Dock Equipment
Cross-references re-pointed to the standard that now owns each subject, after neighboring standards were remade
Showing changes from Rev 2
to Rev 3
in Loading Dock Equipment.
---
title: Loading Dock Equipment
…2 unchanged lines
description: >
When to use: Specifying, selecting, and installing the full assembly of equipment at truck-height loading docks — dock levelers (mechanical, hydraulic, air-powered, vertical-storing, edge-of-dock), portable dock plates and boards, dock bumpers, dock seals and shelters, vehicle/trailer restraints, and the electrical interlock and dock-light system that ties them together. Applies to distribution centers, warehouses, cold-storage facilities, retail and institutional receiving docks, food and beverage plants, and industrial facilities, for both new dock-pit construction and retrofit at existing openings.
− Not intended for: The doors that close the dock opening (see [[sync/overhead-coiling-doors]] and [[sync/sectional-overhead-doors]]); the structural concrete/masonry dock pit and pit-wall (general structural package); shop-fabricated dock approach aprons and recessed bumper angle iron furnished by structural steel trades (see [[sync/metal-fabrications]]); wall and corner protection at staging areas (see [[sync/wall-and-corner-protection]]); interior cranes and hoists (see [[sync/overhead-material-handling]]); refrigeration and cold-chain systems (see [[sync/refrigeration-equipment]]); and dock approach paving, yard grading, and trailer-yard design (civil/site scope).
+ Not intended for: The doors that close the dock opening (see [[sync/overhead-coiling-doors]] and [[sync/sectional-overhead-doors]]); the structural concrete/masonry dock pit and pit-wall (general structural package); shop-fabricated dock approach aprons (see [[sync/metal-fabrications]]); recessed bumper angle iron at the dock edge (see [[sync/miscellaneous-metals]]); wall and corner protection at staging areas (see [[sync/wall-and-corner-protection]]); interior cranes and hoists (see [[sync/overhead-material-handling]]); refrigeration and cold-chain systems (see [[sync/refrigeration-equipment]]); and dock approach paving, yard grading, and trailer-yard design (civil/site scope).
---
…13 unchanged lines
- Overhead coiling and sectional doors closing the dock opening — see [[sync/overhead-coiling-doors]] and [[sync/sectional-overhead-doors]].
- Structural concrete or masonry dock pit, pit walls, embedded angles, and anchor bolts — part of the general structural/concrete package; this Section coordinates rough-in dimensions but does not re-specify the concrete.
−- Shop-fabricated steel dock approach aprons and recessed bumper angle iron welded in place by structural steel trades — see [[sync/metal-fabrications]].
+- Shop-fabricated steel dock approach aprons — see [[sync/metal-fabrications]]; recessed bumper angle iron at the dock edge — see [[sync/miscellaneous-metals]].
- Wall and corner protection at dock staging and circulation areas — see [[sync/wall-and-corner-protection]].
- Interior overhead cranes and hoists used for lifting within the building — see [[sync/overhead-material-handling]].
…577 unchanged lines
- Control panel components and indicator lamps
```