Miscellaneous Metals
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 9
to Rev 10
in Miscellaneous Metals.
---
title: Miscellaneous Metals
…99 unchanged lines
- "Delegated design calculations"
- "Fixed ladder shop drawings with fall protection method"
+constraint: all_of
```
…27 unchanged lines
- "Fabricator qualification statement"
- "Ladder safety system test statement"
+constraint: all_of
```
…20 unchanged lines
- "Coating repair record"
- "Manufacturer warranties"
+constraint: all_of
```
…5 unchanged lines
```datasheet
−label: Minimum Fabricator Experience
+label: Fabricator Experience
type: range
unit: years
…2 unchanged lines
step: 1
default: 5
+constraint: min
```
…241 unchanged lines
step: 2
default: 18
+constraint: exact
```
…24 unchanged lines
setpoints: [0.75, 1, 1.25]
default: 0.75
+constraint: min
```
…10 unchanged lines
setpoints: [10, 11, 12, 14]
default: 12
+constraint: exact
```
…82 unchanged lines
max: 6
step: 1
+constraint: exact
```
…58 unchanged lines
drawing_ref: "the building sections and the ship's ladder details"
default: deferred
+constraint: exact
```
…14 unchanged lines
step: 2
default: 24
+constraint: exact
```
…45 unchanged lines
setpoints: [4, 6, 8, 10, 12]
default: 8
+constraint: min
```
…15 unchanged lines
```datasheet
−label: Maximum Shelf Angle Segment Length
+label: Shelf Angle Segment Length
type: range
unit: ft
…2 unchanged lines
setpoints: [10, 20, 30, 40]
default: 20
+constraint: max
```
…33 unchanged lines
step: 6
default: 24
+constraint: max
```
…96 unchanged lines
```datasheet
−label: Minimum Clear Height From Roof Surface to Underside of Dunnage-Supported Equipment
+label: Clear Height From Roof Surface to Underside of Dunnage-Supported Equipment
type: range
unit: in
min: 14
max: 36
step: 2
+constraint: min
```
…23 unchanged lines
max: 8
setpoints: [4, 6, 8]
+constraint: exact
```
…75 unchanged lines
drawing_ref: "the guard post footing details"
default: deferred
+constraint: min
```
…105 unchanged lines
setpoints: [1, 2, 5]
default: 1
+constraint: min
```
…5 unchanged lines
## Manufacturer warranties for ladder safety systems and anchor channels shall be assigned to the Owner and delivered with the closeout submittals, and they do not reduce the Contractor's warranty under this standard.