Non-Shrink Grout
Cross-references re-pointed to the standard that now owns each subject, after neighboring standards were remade
Showing changes from Rev 2
to Rev 3
in Non-Shrink Grout.
---
title: Non-Shrink Grout
…11 unchanged lines
substrate (see [[sync/concrete-pads]]); anchor bolt embedment in new footings (see
[[sync/shallow-foundations]]); base plate and connection detailing above the plate
− (see [[sync/structural-steel-connections]]); base plate fabrication (see
+ (see [[sync/structural-steel-connections]]); column base plate fabrication (see
+ [[sync/structural-steel-framing]]); bearing plates of miscellaneous items (see
[[sync/miscellaneous-metals]]); masonry mortar beds and CMU core grout (see
[[sync/concrete-masonry-units]]); and tile-setting or non-load-bearing decorative grout.
…22 unchanged lines
### The concrete substrate that receives the grout is specified under [[sync/concrete-pads]] or [[sync/cast-in-place-concrete]]; anchor bolt embedment into new footings is specified under [[sync/shallow-foundations]]. {note}
−### Base plate sizing, anchor rod design, and connection detailing above the plate are specified under [[sync/structural-steel-connections]] and [[sync/miscellaneous-metals]]; this standard begins at the underside of the plate. {note}
+### Base plate sizing, anchor rod design, and connection detailing above the plate are specified under [[sync/structural-steel-connections]] and [[sync/structural-steel-framing]], and bearing plates of miscellaneous items under [[sync/miscellaneous-metals]]; this standard begins at the underside of the plate. {note}
### Masonry mortar beds, grout fill in CMU cores, and non-load-bearing tile or decorative grout are outside this standard. {note}
…583 unchanged lines
### Keeping a small stock of the exact grout used lets the Owner re-grout a relocated piece of equipment or repair a damaged edge with the same qualified product rather than an unmatched substitute. {note}