Packaged Pump and Lift Stations
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 3
to Rev 4
in Packaged Pump and Lift Stations.
---
title: Packaged Pump and Lift Stations
…134 unchanged lines
- "Control panel schematic, layout, and bill of material"
- "Station electrical one-line diagram"
+constraint: all_of
```
…35 unchanged lines
- "Warranty documentation by serial number"
- "Spare parts inventory"
+constraint: all_of
```
…9 unchanged lines
```datasheet
−label: Minimum Station Manufacturer Experience
+label: Station Manufacturer Experience
type: range
unit: years
…2 unchanged lines
setpoints: [0, 3, 5, 10, 15, 20]
default: 5
+constraint: min
```
…155 unchanged lines
setpoints: [10, 25, 50, 75, 100, 150, 200, 300, 400, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10000]
default: deferred
+constraint: exact
```
…7 unchanged lines
setpoints: [10, 15, 20, 25, 30, 40, 50, 60, 75, 100, 125, 150, 200, 250, 300]
default: deferred
+constraint: exact
```
…9 unchanged lines
```datasheet
−label: Maximum Pump Starts per Hour
+label: Pump Starts per Hour
type: range
unit: starts per hour
…3 unchanged lines
derived: "the motor manufacturer's published starts-per-hour limit for the motor furnished"
default: derived
+constraint: max
```
…9 unchanged lines
max: 24
setpoints: [0, 0.5, 1, 2, 4, 8, 12, 24]
+constraint: min
```
…66 unchanged lines
setpoints: [36, 48, 60, 72, 84, 96, 108, 120, 144]
default: deferred
+constraint: exact
```
…9 unchanged lines
setpoints: [6, 8, 10, 12, 14, 16, 18, 20, 25, 30, 35, 40]
default: deferred
+constraint: exact
```
…30 unchanged lines
max: 2.0
setpoints: [1.0, 1.1, 1.2, 1.25, 1.5, 2.0]
+constraint: min
```
…62 unchanged lines
```datasheet
−label: Minimum Spherical Solids Passage
+label: Spherical Solids Passage
type: range
unit: in
…2 unchanged lines
setpoints: [2, 2.5, 3, 4]
default: 3
+constraint: min
```
…93 unchanged lines
setpoints: [0.5, 0.75, 1, 1.5, 2, 3, 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 100, 125, 150, 200, 250, 300]
default: deferred
+constraint: exact
```
…7 unchanged lines
setpoints: [115, 208, 230, 460, 480, 575]
default: deferred
+constraint: exact
```
…174 unchanged lines
- "High-level alarm float"
- "Low-level pump cutoff float"
+constraint: all_of
```
…92 unchanged lines
default:
- "Local audible horn and visual beacon with silence pushbutton"
+constraint: all_of
```
…24 unchanged lines
- "Ground fault protected convenience receptacle"
- "Intrinsically safe barriers for wet well devices"
+constraint: all_of
```
…94 unchanged lines
- "Control panel functional test"
- "Basin hydrostatic test"
+constraint: all_of
```
…31 unchanged lines
- "Alternation and standby start verification"
- "Alarm receipt at the remote location"
+constraint: all_of
```
…64 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: min
```
…25 unchanged lines
- "One spare float switch of each type furnished"
- "One set of control panel fuses and pilot lamps"
+constraint: all_of
```
## A complete spare pump shall be furnished where the Authority Having Jurisdiction or the utility that will own the station requires one in addition to the installed standby pump.
## The station manufacturer shall commit in writing that replacement parts for the pump model furnished will remain available for not less than ten years from the date of manufacture.