Post-Installed Concrete and Masonry Anchors
Cross-references re-pointed to the standard that now owns each subject, after neighboring standards were remade
Showing changes from Rev 2
to Rev 3
in Post-Installed Concrete and Masonry Anchors.
---
title: Post-Installed Concrete and Masonry Anchors
…15 unchanged lines
non-shrink grout bedding beneath base plates (use sync/non-shrink-grout);
the masonry mortar/grout substrate itself (use sync/masonry-mortar-and-grout);
− brick masonry construction (use sync/brick-masonry); steel base-plate
− fabrication and welding (use sync/metal-fabrications); and powder-actuated
+ brick masonry construction (use sync/brick-masonry); column base-plate
+ fabrication and welding (use sync/structural-steel-framing); bearing plates of
+ miscellaneous items (use sync/miscellaneous-metals); and powder-actuated
fasteners driven without a drilled hole.
---
…19 unchanged lines
- The masonry mortar or grout that forms the substrate - see [[sync/masonry-mortar-and-grout]].
- Brick masonry substrate selection and construction - see [[sync/brick-masonry]].
−- Steel base-plate fabrication and welding - see [[sync/metal-fabrications]].
+- Column base-plate fabrication and welding - see [[sync/structural-steel-framing]], and for bearing plates of miscellaneous items [[sync/miscellaneous-metals]].
- Powder-actuated fasteners driven into concrete without a drilled hole.
…454 unchanged lines
## Unused, unexpired adhesive cartridges and surplus anchors that the Contract designates as Owner property shall be turned over at closeout with their packaging and lot documentation intact.