Temperature Instrumentation
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 3
to Rev 4
in Temperature Instrumentation.
---
title: Temperature Instrumentation
…94 unchanged lines
- "Thermowell material certificates and mill test reports"
- "Transmitter configuration sheets"
+constraint: all_of
```
…20 unchanged lines
- "Factory calibration certificates"
- "Manufacturer's installation instructions"
+constraint: all_of
```
…20 unchanged lines
- "Operation and maintenance data with recalibration intervals"
- "Warranty documentation"
+constraint: all_of
```
…299 unchanged lines
setpoints: [0.125, 0.188, 0.25, 0.375]
default: 0.25
+constraint: exact
```
…234 unchanged lines
```datasheet
−label: Maximum Transmitter Reference Accuracy, Pt100 Input
+label: Transmitter Reference Accuracy, Pt100 Input
type: range
unit: °C
min: 0.05
max: 0.5
setpoints: [0.05, 0.1, 0.15, 0.2, 0.3, 0.5]
+constraint: max
```
…80 unchanged lines
setpoints: [3, 5]
default: 5
+constraint: exact
```
…48 unchanged lines
```datasheet
−label: Maximum Recalibration Interval
+label: Recalibration Interval
type: range
unit: months
…2 unchanged lines
setpoints: [6, 12, 24, 36]
default: 12
+constraint: max
```
…17 unchanged lines
- "Hydrostatic test of the bore and stem"
- "Dimensional inspection against the reviewed drawing"
+constraint: all_of
```
…64 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: min
```
…18 unchanged lines
- "Inserts of each type, length, and tolerance class installed"
- "Transmitters of each model installed"
+constraint: all_of
```
…8 unchanged lines
setpoints: [1, 2, 3, 5]
default: 1
+constraint: exact
```
## Spare parts shall match the installed devices in model, range, tolerance class, and firmware, and shall be turned over against a written inventory signed by the Owner's representative.