Through-Wall Flashing and Masonry Moisture Control
Cross-references re-pointed to the standard that now owns each subject, after neighboring standards were remade
Showing changes from Rev 2
to Rev 3
in Through-Wall Flashing and Masonry Moisture Control.
---
title: Through-Wall Flashing and Masonry Moisture Control
…14 unchanged lines
anchors, and shelf-angle design (use [[sync/masonry-anchorage-and-veneer]]);
below-grade or under-slab self-adhered sheet waterproofing (use
− [[sync/self-adhering-sheet-waterproofing]]); sheathing and its WRB facing (use
+ [[sync/below-grade-waterproofing]]); sheathing and its WRB facing (use
[[sync/wood-sheathing]]); and window/door sill-pan flashing as a fenestration
sub-component (see ASTM E2112 / AAMA 711).
…24 unchanged lines
### Masonry veneer ties, anchors, and shelf-angle structural design are excluded and are governed by [[sync/masonry-anchorage-and-veneer]]. {note}
−### Below-grade and under-slab self-adhered sheet waterproofing is excluded and is governed by [[sync/self-adhering-sheet-waterproofing]]. {note}
+### Below-grade and under-slab self-adhered sheet waterproofing is excluded and is governed by [[sync/below-grade-waterproofing]]. {note}
### Wall sheathing and its housewrap/WRB facing are excluded and are governed by [[sync/wood-sheathing]]. {note}
…631 unchanged lines
- Lap sealant or splice tape
```