---
title: Cold-Formed Metal Framing
…317 unchanged lines
- "10 in. (1000)"
- "12 in. (1200)"
− - "As indicated on structural drawings"
−default: "As indicated on structural drawings"
+default: deferred
```
…31 unchanged lines
- "97 mil (12 gauge, 0.1017 in.)"
- "118 mil (10 gauge, 0.1242 in.)"
− - "As indicated on structural drawings"
−default: "As indicated on structural drawings"
+default: deferred
```
…45 unchanged lines
type: select
unit: in.
−drawing_ref: true
+drawing_ref: "architectural partition type schedule"
options:
- "1-5/8 in. (158)"
…3 unchanged lines
- "4 in. (400)"
- "6 in. (600)"
− - "As indicated on architectural partition type schedule"
−default: "As indicated on architectural partition type schedule"
+default: deferred
```
…35 unchanged lines
type: select
unit: in.
+drawing_ref: "structural drawings"
options:
- "1/2 in. vertical deflection"
- "3/4 in. vertical deflection"
- "1 in. vertical deflection"
- "1-1/2 in. vertical deflection"
− - "Per structural drawings / specialty engineer"
−default: "Per structural drawings / specialty engineer"
+default: deferred
```
…49 unchanged lines
type: select
unit: ft o.c.
+drawing_ref: "structural drawings"
options:
- "4 ft on center (heavy or tall studs)"
- "5 ft on center"
- "6 ft on center"
- "8 ft on center"
− - "Per supplier engineer / structural drawings"
−default: "Per supplier engineer / structural drawings"
+default: deferred
```
…339 unchanged lines
## Where delegated design is used, the specialty engineer's professional liability for the design of the framing system extends per the engineer's professional services agreement and is not limited by the construction warranty period.