SynC · Topic
These are the standards in the SynC Standards library that cover DOAS. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Packaged dedicated outdoor air systems (DOAS) that condition 100% outdoor air to satisfy the building's ventilation requirement independently of the spaces' sensible cooling and heating. Covers indoor and outdoor/rooftop units, the air-to-air energy recovery section (enthalpy wheel, fixed-plate, heat-pipe, or runaround loop), the deep-cooling and dehumidification section (integrated DX, air-source or water-source heat pump, or chilled water), the reheat method that controls leaving dewpoint and supply air temperature (hot-gas reheat, modulating reheat, wraparound heat pipe, or dehumidification wheel), the heating source, filtration, fans, casing, and the controls integration that coordinates the DOAS with the parallel sensible system it serves. Applicable to DOAS paired with variable refrigerant flow, fan coils, chilled beams, water-source heat pumps, or sensible-only rooftop units, in commercial, institutional, multifamily, and light-industrial buildings.
Variable refrigerant flow (VRF/VRV) air-conditioning and heat pump systems serving commercial, institutional, and multifamily buildings, in which one or more inverter-driven condensing units circulate refrigerant through a piped network to multiple indoor fan-coil units, each metered by an electronic expansion valve. Covers heat pump (cooling-or-heating) and heat recovery (simultaneous cooling and heating) systems, air-cooled and water-source (water-cooled) condensing units, ducted and non-ducted indoor unit types, branch controllers and refrigerant selector boxes, A2L refrigerant safety and leak detection, and coordination of a dedicated outdoor air system for ventilation.