SynC · Topic
These are the standards in the SynC Standards library that cover Egress. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Swinging door openings furnished as one combined package of hollow metal doors and frames, architectural wood flush doors, and finish hardware, in commercial, institutional, and light-industrial construction. Covers the opening schedule as the coordination instrument; hollow metal performance levels, models, face-sheet materials, cores, frame thickness, profile, construction method, anchorage, grout fill, and factory finish; wood door duty levels, appearance grades, cores, face materials, veneer selection and matching, edges, and finishing; fire-rated and smoke-rated listed assemblies under NFPA 80, NFPA 105, and UL 10C; hinges, locksets, exit devices, closers, stops, protection plates, thresholds, and gasketing; cylinders, keyways, and keying hierarchy; electrified hardware, fail modes, power transfer, and fire alarm release; accessible-opening obligations; installation tolerances and clearances; fire door inspection at turnover; and warranty.
Dedicated indoor electrical rooms and closets housing service entrance equipment, distribution switchgear, switchboards, panelboards, motor control centers, dry-type transformers, automatic transfer switches, indoor standby generators or paralleling switchgear, DC battery systems, and the associated grounding, raceway, and control infrastructure for commercial, institutional, healthcare, higher-education, data center, and industrial buildings. Covers working clearances, dedicated electrical space, headroom, door and egress arrangement, fire-resistance ratings of enclosing assemblies, ventilation and cooling for equipment heat rejection, room illumination, convenience power, drainage and plumbing restrictions, security and access control, equipment anchorage, finishes, and signage.
Permanently installed interior lighting fixtures (luminaires) for commercial, institutional, and industrial buildings — recessed troffers, surface-mounted and pendant linear luminaires, downlights, and wall-mounted fixtures. Covers the light source and luminous performance, photometric and color characteristics, the LED driver and electrical connection, integral and protocol-based dimming, luminaire construction and mounting, and emergency egress lighting integral to or associated with the fixture.
Shop-fabricated metal stairs and railing systems for commercial, institutional, and industrial buildings — egress and convenience stairs built as steel pan stairs with concrete fill, steel plate (formed plate) stairs, and bar-grating-tread stairs, including their stringers, treads, risers, landings, and supporting framing, together with the handrails and guards (guardrails) of steel, aluminum, or stainless pipe, tube, and picket. Covers structural design for the IBC stair uniform live load and concentrated load, deflection and vibration serviceability, tread and riser dimensions and slip-resistant nosings to the IBC means-of-egress provisions, the IBC structural loads on handrails and guards (concentrated, uniform, and infill), shop and field welding to AWS D1.1, bolted and anchored connections, hot-dip galvanizing and shop priming, and field finishing.
Interior and building-mounted architectural and code-required signage for commercial, institutional, and light-industrial buildings — tactile room-identification signs, directional and overhead wayfinding signs, regulatory and informational panel signs, dimensional letters and logos, code-required egress and accessibility signage (exit, stairway identification, floor-level, area-of-refuge), and both non-illuminated and electrically illuminated signs. Covers accessibility requirements for tactile characters and Braille, visual character legibility, contrast and finish, mounting height and location, substrate and copy methods, the sign and message schedule, and installation.