SynC · Topic
These are the standards in the SynC Standards library that cover Functional Testing. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
The integration, configuration, and acceptance-testing scope performed by the control system integrator on an industrial, process, or water and wastewater treatment project, whether the plant is new, expanded, or migrated to a replacement control platform. Covers the division of responsibility between the integrator, the electrical trade, the mechanical and process trade, and the packaged-equipment vendors; the authorship and content of the control narratives; tag and point naming per ANSI/ISA-5.1; the controlled I/O list and the loop diagrams per ANSI/ISA-5.4; the software configuration management workflow from first baseline through as-built; the integration of packaged-skid controls into the plant SCADA; the integrator's secure delivery of the configured system; the integration-seam verification of safety instrumented functions; the factory acceptance test, site acceptance test, site integration test, loop checks, performance verification test, and endurance test under ANSI/ISA-62381 and ANSI/ISA-62382; the commissioning sequence; training on the narratives and the maintenance of the delivered configuration; as-built documentation; the integration warranty; and the turnover of source configuration.
The building lighting control system for commercial, institutional, and industrial projects — the sensors, switches, dimmers, time switches, relay and contactor panels, photosensors, and networked or luminaire-level control equipment that turn lighting on, off, and to intermediate levels in response to occupancy, daylight, schedule, and manual command. Covers the control devices, the dimming and control interface to the luminaire driver (0–10V, DALI/DALI-2, phase-cut), networked and luminaire-level control systems, the emergency lighting control interface required by UL 924, the low-voltage control wiring, the documented sequences of operation, and the commissioning and functional testing the energy code requires.