SynC · Topic
These are the standards in the SynC Standards library that cover Parking Structure. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Cast-in-place post-tensioned (PT) concrete for buildings and parking structures, where prestressing steel is tensioned after the concrete has cured and the force is anchored against the hardened member. Covers both dominant systems: unbonded single-strand tendons (greased-and-sheathed seven-wire strand, the standard system for elevated building floors and parking decks) and bonded multistrand tendons (strand bundled in ducts that are grouted after stressing, used for transfer girders, longer spans, and heavier post-tensioned beams). Addresses prestressing strand, anchorages and couplers and their qualification, sheathing and corrosion protection including encapsulated and electrically-isolated tendons for parking and aggressive exposure, tendon profile and placing tolerances, concrete strength at stressing, stressing operations and sequence, elongation measurement and acceptance, wedge seating, tendon cutting and pocket treatment, grouting of bonded tendons, and field quality control and records. Applicable to commercial, institutional, residential, and parking buildings.
Upward-acting sectional overhead doors whose horizontal panels (sections) hinge together and track horizontally beneath the ceiling when open, serving loading docks, drive-through service openings, parking garages, warehouses, and light-industrial buildings. Covers insulated (foamed polyurethane sandwich), non-insulated (ribbed or pan steel), and full-vision aluminum-and-glazing doors; panel material, gauge, thickness, and finish; vision lites and glazing; weatherseals and air-infiltration class; torsion and extension counterbalance and cycle-life rating; track and lift configuration selected by available headroom and sideroom; wind-load design pressure and reinforcement; manual chain-hoist and motor operation with UL 325 entrapment protection; installation, field testing including the safety-reverse test, and warranty.