SynC · Topic
These are the standards in the SynC Standards library that cover Windows. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Architectural vision glass and glazing for storefronts, curtain walls, windows, exterior and interior doors, sidelights, transoms, borrowed lites, partitions, and other building glazing infill. Covers annealed, heat-strengthened, and fully tempered flat glass; laminated glass; coated (low-emissivity and solar-control) glass; insulating glass units (IGUs) including double and triple makeups; spandrel and ceramic-frit glass; safety glazing in hazardous locations per the International Building Code; glass strength and thickness determination under wind and snow load per ASTM E1300; thermal stress and edge-condition selection of annealed versus heat-strengthened versus fully tempered glass; nickel-sulfide heat-soak treatment for tempered glass; low-iron glass; warm-edge spacers and inert-gas fill; structural silicone and dry-gasket glazing methods; setting blocks, edge clearances, and glazing accessories; and field installation, testing, cleaning, and warranty of the glass and glazing materials.
Interior window treatments installed for glare control, solar heat control, daylight management, privacy, and room darkening in commercial, institutional, and light-industrial buildings. Covers manual and motorized roller shades with solar screen, room-darkening, and blackout fabrics, dual-roller assemblies carrying two shades on one mounting, and draperies on track systems. Addresses fabric composition, openness factor and solar optical properties, fire performance under NFPA 701 and ASTM E84, low-emitting certification, lightfastness, fungal and antimicrobial performance, roller tube and bracket hardware, fascia and pocket concealment, hembars, manual clutch operation and the cord retention provisions of ANSI/WCMA A100.1, motorized operation and its power, listing, control, and integration, mounting condition and light gap, perimeter light-control channels, accessible operation, field testing, installation, warranty, and spare parts.