Facility Fuel-Oil Systems
Datasheet constraints: every range, checkbox and listbox field now states its direction
Showing changes from Rev 4
to Rev 5
in Facility Fuel-Oil Systems.
---
title: Facility Fuel-Oil Systems
…110 unchanged lines
- "Hydraulic calculation for each line"
- "Fuel compatibility statement"
+constraint: all_of
```
…23 unchanged lines
- "Installation instructions with interstice pressure limits"
- "Warranty terms and startup conditions"
+constraint: all_of
```
…31 unchanged lines
- "As-built flow diagram and buried piping record"
- "Warranty documentation"
+constraint: all_of
```
…57 unchanged lines
- "Recirculation of fuel from the bulk tank through a heated day tank"
- "Heated enclosure around the pump set and filters"
+constraint: all_of
```
…9 unchanged lines
max: 100
step: 5
+constraint: exact
```
…24 unchanged lines
- "Direct suction supply to the engine lift pump or burner fuel unit without a transfer pump"
- "Gravity supply from a tank above the served equipment through a level-controlled fill valve"
+constraint: all_of
```
…124 unchanged lines
step: 1
default: derived
+constraint: exact
```
…9 unchanged lines
step: 5
default: derived
+constraint: exact
```
…75 unchanged lines
- "Hand-off-automatic selection for each pump and valve"
- "Dry contact for each alarm and a common alarm contact to the served equipment controller"
+constraint: all_of
```
…45 unchanged lines
max: 30
setpoints: [1, 2, 3, 5, 10, 25, 30]
+constraint: exact
```
…27 unchanged lines
max: 30
setpoints: [1, 2, 3, 7, 14, 30]
+constraint: max
```
…9 unchanged lines
step: 1
default: derived
+constraint: exact
```
…20 unchanged lines
- "Programmable run timer in the skid controller"
- "Dry contacts for skid running, filter change, water alarm, and skid fault"
+constraint: all_of
```
…7 unchanged lines
max: 10
setpoints: [1, 2, 3, 5, 10]
+constraint: exact
```
…234 unchanged lines
- "Owner's facility monitoring service by dial-out or network"
- "Fire alarm system supervisory point"
+constraint: all_of
```
…91 unchanged lines
step: 5
default: derived
+constraint: exact
```
…7 unchanged lines
max: 24
setpoints: [0.5, 1, 2, 4, 24]
+constraint: min
```
…84 unchanged lines
setpoints: [1, 2, 5]
default: 1
+constraint: min
```
…29 unchanged lines
- "Leak sensor of each type installed"
- "Fuses and pilot lamps of each type in the controllers and console"
+constraint: all_of
```
## Spare parts shall match the installed parts in model and material, shall be delivered in the manufacturer's packaging with the part number marked on the outside, and shall be turned over against a written inventory signed by the Owner's representative.