SynC · SynC Standards
Low Voltage Panelboards (Superseded)
Download
Build a datasheet from this standard
Start a project with this standard already attached — one click, no setup.
Use in a project
1 Scope
NOTE This standard has been superseded and is retained only for existing adoptions and revision history. (1.1)
NOTE Panelboards are by definition equipment rated 1000 V or less under NFPA 70 Article 408 and UL 67, so the "low voltage" qualifier distinguished this standard from nothing; the corpus has standardized on the simple name. (1.2)
NOTE All content of this standard, merged with the material formerly held under the simple name, is covered by PanelboardsPanelboardsResolves to the current adopted revision.sync/panelboards. (1.3)
NOTE Existing adoptions of this standard continue to function against their adopted revision; new projects should adopt PanelboardsPanelboardsResolves to the current adopted revision.sync/panelboards. (1.4)
This standard is written and maintained by SynC and licensed under Creative Commons Attribution 4.0. You may share and adapt it, including commercially, provided you credit SynC Standards, link to the license, and indicate any changes. Each standard is drafted from cited sources under published authoring rules, reviewed before adoption, and corrected in the open. Keep the attribution and notice below with any copy; it carries the warranty notice the license asks you to retain.
"Low Voltage Panelboards (Superseded)," SynC Standards, revision 6. Licensed under CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Source: https://synergyinconstruction.com/standards/general/low-voltage-panelboards. Reference material only; not professional engineering advice and provided without warranty. Verify against governing codes and have a licensed professional review before use.