SynC · Topic
Floor Drains
These are the standards in SynC Standards that cover Floor Drains. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide, with the standards each is verified against. All of it is written and maintained by SynC, free to read without an account, and published under CC BY 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Standards
- Sanitary Waste and Vent Piping
The sanitary drain, waste, and vent piping inside a building and the building drain out to five feet beyond the foundation wall, in commercial, institutional, industrial, and multifamily buildings: the pipe, fittings, joints, and couplings in cast iron, PVC, ABS, copper, galvanized steel, stainless steel, and polyethylene; the fixture traps, trap arms, and the venting that protects them; the slope and the changes of direction of horizontal drainage; the indirect waste receptors that take equipment discharge; the connections to fixtures, floor drains, cleanouts, grease interceptors, sumps, and ejectors; hangers, vertical support, seismic restraint, thermal movement, acoustic treatment, sleeves, and firestopping; below-slab bedding and backfill; and the rough-in and final tests that prove the system tight.