SynC · Topic
Lighting Controls
These are the standards in SynC Standards that cover Lighting Controls. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide, with the standards each is verified against. All of it is written and maintained by SynC, free to read without an account, and published under CC BY 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Standards
- Exterior and Site Lighting
Exterior and site lighting for commercial, institutional, industrial, and campus projects, including area and roadway luminaires, parking-lot and parking-structure luminaires, floodlights, wall-pack luminaires, bollards, and their supporting poles, foundations, and lighting controls. Covers luminaire photometric performance, light-pollution and dark-sky control, LED drivers and electrical requirements, pole and support structures, foundations and anchorage, photocontrol and scheduling controls, surge protection, and corrosion-resistant finishes for outdoor service.
- Lighting Controls
The interior lighting control system of a commercial, institutional, or industrial building: the occupancy and vacancy sensors, daylight sensors, time schedules, manual control stations, relay panels, lighting contactors, lighting-control panelboards, room controllers, networked and luminaire-level control systems, and the management software that together decide when each luminaire is on, off, or at an intermediate level. Covers the control architecture and its network, the control signal and protocol delivered to the luminaire driver and the minimum light level the system commands, occupancy and vacancy sensing, daylight-responsive control, time scheduling and override, manual control, branch-circuit switching equipment, automatic receptacle control, demand-responsive control, the interfaces to the building automation system, motorized shades, and other building systems, the UL 924 override device that returns a controlled egress luminaire to full output, the low-voltage control wiring, the documented sequences of operation, startup, programming, functional testing, training, warranty, and spares.