---
title: Doors, Frames, and Hardware
…323 unchanged lines
- "4-7/8 in"
- "5-3/4 in"
− - "Custom — as indicated on drawings"
default: "4-7/8 in"
```
…147 unchanged lines
- "Cherry — warm mid-tone, traditional interior millwork appearance"
- "Paint-grade — birch, poplar, or as selected, for painted finish only"
− - "As scheduled on door schedule"
−default: "As scheduled on door schedule"
+default: deferred
```
…124 unchanged lines
- "90 minutes (openings in 2-hour fire barriers)"
- "180 minutes (3-hour rating — openings in fire walls)"
−default: "[[drawing: as indicated on door schedule]]"
+default: deferred
```
…116 unchanged lines
type: free_text
drawing_ref: true
−default: "[[drawing: hardware set number from opening schedule]]"
+default: deferred
```
…103 unchanged lines
drawing_ref: true
options:
− - "As scheduled — Owner standard lever"
- "ADA-compliant lever (all accessible-route openings)"
- "Round knob — non-accessible, limited to non-required openings"
…230 unchanged lines
- "BHMA 652 — Satin chromium, plated on steel base"
- "BHMA 689 — Aluminum painted"
− - "As scheduled"
default: "BHMA 630 — Satin stainless steel (US32D) — standard exterior and healthcare"
```
…294 unchanged lines
label: Frame Installation Tolerances — Reference Standard
type: radio
+drawing_ref: true
options:
- "ANSI/SDI A250.11 — plumb within 1/16 in. per foot of height, square within 1/16 in."
− - "Project-specified tighter tolerance — see drawings"
default: "ANSI/SDI A250.11 — plumb within 1/16 in. per foot of height, square within 1/16 in."
```
…230 unchanged lines
### Deficiencies discovered during the warranty period that are attributable to installation workmanship shall be corrected by the Contractor at no cost to the Owner.