SynC · Topic
These are the standards in the SynC Standards library that cover Critical Power. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Automatic transfer switches rated 1000 V and below, listed to UL 1008, that move a load between a normal source and an alternate source without operator action. Covers the switching mechanism, transition type, bypass-isolation construction, neutral treatment, the controller and its sensing, time delays, exerciser, load management and communications provisions, ratings including withstand and closing and short-time ratings, service-entrance construction, enclosures, identification, factory and field testing, installation, warranty, and spare parts, for switches serving emergency, legally required standby, optional standby, critical operations, and health care essential electrical system loads.
Stationary battery systems with chargers providing 24, 48, 125, or 250 VDC control power to switchgear protective relays, breakers, transfer switches, communications, generator starting, emergency lighting inverters, and other critical control loads in substations, generating stations, industrial facilities, and electrical rooms. Covers vented lead-acid (VLA), valve-regulated lead-acid (VRLA), and vented nickel-cadmium (Ni-Cd) chemistries; their chargers; DC distribution; battery monitoring; and the battery room or cabinet. Cross-references the loads they serve (see Low Voltage Switchgear and Medium Voltage Switchgear) and grounding of the DC system (see Grounding And Bonding).