SynC · Topic
These are the standards in the SynC Standards library that cover Security. Each one is a complete, plain-language specification: the scope it applies to, the requirements that govern it, and a structured equipment datasheet listing the values a project has to decide — ratings, materials, setpoints, and the standards each is verified against. All of it is free to read without an account and published under CC BY-SA 4.0.
A standard usually carries several topics, so most of the entries below also appear under neighbouring subjects. The topics each one carries are listed on its own page.
Electronic access control systems for managing pedestrian entry into commercial, institutional, and industrial buildings. Covers system architecture (standalone, networked, and cloud-managed), door controllers and panels, credential readers and credentials, electrified door hardware coordination, request-to-exit devices, door position switches, low-voltage power supplies with battery backup, controller and reader cabling, head-end software, user management and audit, fire alarm release interface, cybersecurity, and acceptance testing for swinging pedestrian doors.
Site perimeter, security, and screening fencing and the gates in it, for commercial, institutional, and industrial projects. Covers chain-link fence fabric, framework, rails, tension wire and fittings; ornamental tubular picket fence in galvanized steel, non-galvanized steel, and aluminum; welded wire mesh fence; barbed wire and barbed tape toppings; screening and privacy infill; posts, concrete footings, and alternative post-setting methods; swing, horizontal slide, vertical lift, and vertical pivot gates; pedestrian gates including those on an accessible route; automated vehicular gate operators listed to UL 325; gate construction to ASTM F2200; entrapment protection; gate locking and access-control rough-in; grounding and bonding; and fences that serve as a swimming pool or spa barrier.
The operational technology (OT) communications network that connects programmable controllers, remote and distributed I/O, networked field instruments, and the supervisory SCADA and HMI layer in industrial, process, and water and wastewater facilities. Covers the Purdue reference model and the boundary between the OT network and the enterprise network, security zones and conduits under ISA/IEC 62443, industrial Ethernet and serial protocol selection, transmission media by segment class, managed switches and conduit enforcement devices, redundant topologies and recovery time, traffic prioritization, time synchronization, wide-area telemetry to remote sites, the device hardening, account, patch, logging, and backup baseline, and the cable, functional, and security acceptance tests that put the network into service. Applies to new networks, full replacements, and substantial expansions of an existing OT network.